电池包装送料装置总体方案及控制系统设计(毕业论文).doc
《电池包装送料装置总体方案及控制系统设计(毕业论文).doc》由会员分享,可在线阅读,更多相关《电池包装送料装置总体方案及控制系统设计(毕业论文).doc(39页珍藏版)》请在知学网上搜索。
1、XXXXX本科毕业设计毕业论文课题:电池包装送料装置总体方案及控制系统设计 专 业 学生姓名 班 级 学 号 指导教师 完成日期 摘 要可编程控制器(PLC )作为控制系统的核心装置,功能强大、性能稳定可靠。在现代工业自动化生产中得到了广泛的应用。取得了理想的控制效果。本论文以高速全自动电池包装机控制系统为背景,理论与实践相结合,详细阐述了集PLC技术,光电位感应技术等先进控制技术在该包装机控制系统中的应用。论文主要内容如下:概述了可编程控制器PLC的现状及其在包装机械上应用的可能性和前景;通过对电池包装机生产工艺流程的了解,统计其输入输出I/O点,然后进行PLC选型,程序的仿真设计;电池的包
2、装是一个典型的顺序控制,因此我们利用步进控制指令实现了包装过程的程序控制;利用三菱公司的编程软件GX Developer软件进行程序的编写和仿真。本设计的主要任务就是完成PLC控制系统的设计和控制电路的设计。关键词:可编程控制器,电池包装机,仿真AbstractProgrammable logic controller ( PLC ) as the core device of the control system, powerful, stable and reliable performance. It is widely used in modern industrial automat
3、ion production. To obtain the ideal control effect.In this paper, the high-speed automatic battery packaging machine control system as the background, combining theory with practice, elaborated PLC technology, application of photoelectric position sensor technology and advanced control technique in
4、the packing machine control system. The main contents are as follows : an overview of the status of programmable controller PLC and its possibilities and prospects of application in packaging machinery; through the production process of battery packaging machine understanding, statistics of its inpu
5、t and output I/O, and then PLC selection, simulation design program; battery pack is a typical sequential control, therefore we use the step control command to realize the packaging process control program; program using the software programming software GX Developer of the Mitsubishi Co 's prog
6、ramming and simulation.Design the design of the main tasks is to complete the design of PLC control system and control circuit.Keywords: programmable controller, battery packaging machine, simulation- II -目 录摘 要IAbstractII第一章 绪论11.1 全自动包装机PLC控制的目的及意义11.2 包装机控制系统的现状与分析11.3 本文的设计任务2第二章 控制方案要求32.1 该系统能
7、够实现的功能32.2 电池包装送料装置的工作过程32.3 控制方案论证与选择42.3.1 PLC与其它控制装置的比较42.3.2 系统方案的确立82.5 本章小结8第三章 电池包装送料装置控制系统的硬件设计93.1 PLC控制系统结构组成93.2 PLC和I/O扩展模块的选型93.3 PLC控制的优点93.4 其他元器件的选择103.4.1固态继电器的选择103.4.2 断路器的选择113.4 PLCI/0的分配113.6 系统电气控制接线图设计123.7 本章小结13第四章 系统软件设计144.1 PLC的程序设计环境144.2 系统程序设计154.3 PLC控制系统软件程序的编写174.4
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 电池 包装 装置 总体方案 控制系统 设计 毕业论文
